A NEW GENERATION OF REVERSE OSMOSIS
LÄTT: Latest innovative direct flow RO system
RO LÄTT is the latest and most modern reverse osmosis equipment. Its careful design and its versatility are thought to adapt to any house. Ultracompact RO and suitable for any place.
RO LÄTT combines a great capacity to produce pure water with a minimum amount of rejected water. This results in high water savings and a more sustainable performance.
LÄTT Faucet. The Intellegent Tap with water quality indicator
The intelligent Lätt tap display alerts you to the quality of the water. The LED changes color, blue, yellow or red depending on the urgency with which the filters have to be replaced. V-shape for greater cleaning.
• Blue LED: High quality. High salt rejection efficiency (over 90 %) TDS ≤ 100ppm
• Red LED: Low quality. Low salt rejection efficiency (Between 80% and 50%)TDS > 100ppm and ≤ 150ppm
• Yellow LED: Medium quality. Average salt rejection efficiency (Between 90% and 80%) TDS > 100ppm
The design of the V-shaped nozzle will prevent water from dripping after closing the tap. Osmotized water uninterrupted directly in your glass. Its installation is quick and easy.
Filter change reminder
The intelligent Lätt tap display alerts you to the status of the filters.
Lätt is provided with a low (pump protection) and high pressure switch for operation control. It stops the system when the faucet is close and starts again when it is partially emptied.
Interface and front panel
Front panel with three Indicators. Each refers to one stage of the system and gets on when having to replace it. It also advice by acoustic signals. Frontal led indicator which indicates the quality of the outlet water depending on its TDS. This led indicator also indicates in case there is an error as the system checks the internal electronics periodically.
- • Direct Flow (no storage tank)
- • Smart Faucet
- • Smart quality control and warnings
- • Flow rate 1.6 LPM
- • 4 filtration stages
- • Luxurious and compact design
- • Auto Start/Stop
- • Electronic leak sensor
- • High Efficiency RO Membrane 600 GPD
- • Safety System
- • AquaStop system
- • Auto Flushing
- • Filter change reminder
- • Manufacturer Puricom, Spain
- • Dimensions 41.4 x 13.0 x 44.5 сm
- • Power consumption 100W/24V x 4A
- • Weight 12.45 kg
- • Warranty 2 y
- Direct Flow
Direct production of RO water (Tankless)
- High performance
Great flow of water dispensed 2300 L/Day
- Smart Faucet
Water quality contro and maintenance warning
- Filter Control
Automatic maintenance notifiaction
- Quality Control
Control of conductivity
- Sound Warnings
- Auto Start/Stop
- Easy to replace encapsulated filters and membranes
Filters and diaphragm are replaced without tools and without opening the system
- Auto and manual flushing
Auto flushing of RO membrane and manual washing mode
- • Combi Sediment PP+Carbon Block 5 μm
Removes coarse particles, rust, chlorine, organic chemicals, odors, organic pollutants, pesticides and herbicides. UNE 149101 certificate.
- • RO Membrane 600 Gallons Per Day
Reverse Osmosis Membrane composed of thin layers of composite film (TFC). Removes mechanically lead, copper, barium, chromium, mercury, sodium, cadmium, fluoride, nitrites, nitrates, selenium and over 99% of bacteria. Certificate UNE 149101.
- • Post Carbon Block Filter
Improves the taste, removes all residual odors. UNE 149101 certificate.
Spanish Association of Standardization and Certification
|Water source||Tap water 38 ºC ~ 5 ºC, Max. hardness 20 ºF|
|RO Membrane||600 GPD (2300 L/Day) NSF sert|
|Advantages and Functionality|
|Specification||• 4 Stage Filtration • Smart Faucet • Filter Control • Quality Control • AquaStop • LED Status • Sound Warnings • Flow 1.6 L/m • Booster Pump • High performance membrane • Water eficiency / Recovery ratio: Up to 60% • Low maintenance cost • Large life span of filters and membrane|
|Stages 1&2||Sediment&Carbon Filter 5 micron|
|Stage 3||RO Membrane 600 GPD (2300 L/Day)|
|Stage 4||Fine Post Carbon Block Filter|
|Dimensions||13 (w) x 55 (D) x 40.7(H) cm|
|Еnergy consumption||100 W|
|Inlet pressure||100~250 kPA (1~4 bar)|
|Inlet Water Temperature||5 ~ 35 °C|
|Certificates, Origin, Warranty|
|certifications||CE, UNE149101, NSF Components|